Calibration
Calibration and Measurement Capabilities (local accreditation)
(enter 261 in the SAMM column)
Wide range of Chemical Calibration & Testing Capabilities for Gas Detectors, Breath Analyzers, Elemental Analysis (XRF), Structure Elucidation, Purity Analysis/ Assessment, Moisture analysis & Organic analysis
Calibration and Measurement Capabilities (international peer review)
(enter Malaysia in the keywords column)
Proficiency Testing & Measurement Audit
You can submit your application by click on this link
Pattern Approval
Service for Pattern Approval of Weighing Instruments (Non-Automatic and Automatic) are continuing as usual. You can submit your application by click this link
Pattern Approval Application Form
Process Flow
Term and Condition
Pattern EVSE
The list of Pattern Approval that have been approved.
List of Pattern Approved Instruments - 2024
/ PT & MA
Proficiency Testing (PT) Activities
Proficiency Testing (PT)
Proficiency Testing (PT) is an interlaboratory comparisons in which the test item is distributed sequentially among two or more participating laboratories and each laboratory’s result are compared to assigned (reference) values established by NMIM.
Proficiency Testing (PT) Activities
Proficiency testing activities is used as part of the assessment process to assess the ability of laboratories to perform competently calibration/tests/inspection for which accreditation is held¹. Other than satisfying the ISO/IEC 170252 requirement, it is also an important tool in evaluating the comparability of tests and calibration results among laboratories. NMIM proficiency testing activities include Proficiency Testing and Measurement Audit program.
Measurement Audit (MA)
Measurement Audit (MA) is a comparison whereby a well characterised test item is sent to a single laboratory and the results are compared to a reference value established by NMIM.
/ Scientific Metrology
Electrical
Magnetics
Magnetics Laboratory has developed high accuracy capability to support national magnetics measurement activities. The chart illustrates the traceability for magnetics measurement in Malaysia.
Flow
Liquid Volume
Liquid Volume Laboratory is responsible to ensure all measurement in the country comply with the international measurement standards. The chart illustrates the traceability for volume measurement in Malaysia.
Chemical
Rice Moisture
Moisture Content (MC) indicates the amount of water content in paddy or rice. National Metrology Institute Malaysia has developed the capability for calibration and verification of rice moisture meter.
Thermophysical
Radiation Thermometry
Various applications of radiation thermometry encompasses Malaysia’s 12 National Key Economic Area (NKEAs) particularly the Oil & Energy, Palm & Oil, Tourism, Electronics & Electrical, Agriculture and Healthcare. NMIM’s Radiation Thermometry Laboratory is responsible for maintaining and disseminating Malaysia's standards for accurate non-contact temperature measurement in many sectors that spans from medical - human body, food safety - frozen food to manufacturing - metal production.
Mechanical
Dimensional
National Metrology Institute of Malaysia (NMIM) is responsible for the maintenance and dissemination of the national standard for length measurement. NMIM is equipped with two set of iodine-stabilised He-Ne laser systems and on top of the hierarchy for traceability of length, dimensional, angle and form measurements. These laser systems are in accordance with recommendations set by the Consultative Committee for Length (CCL) of the Bureau International des Poids et Measures (BIPM). NMIM is capable to perform the calibration of many types of dimensional measuring instruments, gauges and components.Legal MetrologyPattern Approval
The Weights And Measures Act 1972 provides the legal basis for examining and approving
patterns/designs of measuring instruments suitable for use for trade and other legal purposes.
01
Examination
- a) Assesment of the documentation.b) Assesment of the operation of the instrument against requirements (which are usually based on international recommendations published by OIML).c) Performance testing to ensure that the instrument performs as intended (i.e to within allowable maximum permissible errors) over a range of environmental and usage conditions specified in the requirements.
02
Regulated Measuring Instrument
- List:
- Liquid Capacity Measures
- Linear Measures
- Weights
- Weighing Instruments
- Beam Scales And Balances
- Spring Balances And Scales
- Dead-weight Machines
- Platform Weighing Machines And Weighbridges
- Crane Weighing Machines
- Automatic Weighing Machines
- Instruments For The Measurement Of Liquid Fuel And Lubricants
- Instruments For The Measurement Of Alcoholic Liquor
- Dispenser For The Measurement Of Liquefied Petroleum Gas
- Time Recorders Used For Measuring Parking Timemeter
- Time Recorders Used For Measuring Time
- Water Vending Machines
- Dispenser For Natural Gas
- Road Tankers
- Utility Meters (Energy Meters, Gas Meter And Water Meters)
- Evidential Breath Analysers
- Refrigerant Identifier
- Vehicle Emission Device
- Sphygmomanometer
- Digital Luminance Meter
- Smoke Meter
- Stop Watch
- Parking Meters
- Counter Machines
03
Pre-packaged Products Regulation
- Pre-packaged Product is defined as any commodity that is enclosed in a container or wrapped in any manner, and for which its quantity has been determined and indicated on its label prior to being offer for sale. The quantity of the product contained cannot be changed without the pre-package being opened or doing a perceptible modification. Once Pre-packaged Products Regulation is enforced under Weight and Measures Act 1972 by Ministry of Domestic Trade and Consumer Affairs, all products which fall under this category are required to comply with Average Quantity System (AQS) and no longer based on current practice which is based on Minimum Quantity System.
/ NMIM Events
All about seminars and events
/ Contact us
Want to Discuss With
Our NMIM Teams?
NMIM will help you get things done.
National Metrology Institute of Malaysia (NMIM)
Lot PT 4803, Bandar Baru Salak Tinggi
43900 Sepang
Selangor Darul Ehsan
Lot PT 4803, Bandar Baru Salak Tinggi
43900 Sepang
Selangor Darul Ehsan
+6018–2121 833
Corporate Inquiries
Service Inquiries
Complaint & Feedback
Training Course Request